  |
|
|
HEAVY DUTY HYDRAULIC SHEARING MACHINE
|
|
| DH-22325 | DH-22325-1 |
| SHEET METAL SHEARING FOOT TYPE | MANUAL BACK GAUGE |
| MAJOR FEATURES: |
| * Hydro mechanical heavy duty shear. |
| * The centralized hydraulic logical system provides best performance undedr fast-speed and |
| long0time working. |
| * Hydraulic variable pressure hold=downs can ensure perfect cutting. |
| * Minimized cutting noise. |
| * Low cutting angle and inclined shearing direction. eliminate bowing and twist. |
| * High grade carbon/chrome alloy blades ensure maximum accuracy cutting and longer |
| blade life. |
| * Blade clearance setting is quickly and easily by push/pull adjusting screws. |
| * Selection of jog. single cutting and continuous cutting mode. |
| * All electrics and motors are overload protected. |
| * Worktable with small balls installed for easy and fast moving of workpiece. |
| * Foot switch equipped with safety protection. |
| * For safety reason, the upper blade is designed to rise to the top immediately when |
| poerator removes his foot from foot switch. |
|
DH-22328 SHEET METAL HYDRAULIC SHEARING MACHINE |
 |
 |
 |
 |
DH-22328-1 |
DH-22328-2 | DH-22328-3 | DH-22328-4 |
| Side gauge with dual met- | Heavy duty variable pres- | Power back gauge driven | NC back gauge |
| ric/imperical scale and | sure hold down at the end | by ballscrew and guide- | OPTIONAL |
| front setter | of table to provide a solid | way with housing guard | |
| clamping area for small | OPTIONAL | ||
| workpiece. |
|
DH-22334 SHEET METAL HEAVY DUTY HYDRAULIC SHEARING MACHINE |
SPECIFICATIONS :
MODEL |
Cutting capacity mild steel(mm) | Strokes per min(S.P.M.) | Rake angle | Holddowns | Gauge range | Oil-tank capacity(gallons) | Motor(HP) | Shipping Weight(kg) | Packing (cm) | ||
| Number | Pressure(tons) | Front(mm) | Back(mm) | ||||||||
| DH-22325 | 3.5x1320 | 40 | 1º 10' | 8 | 2.5 | 1000 | 600 | 12 | 7.5 | 1400 | 205x92x142 |
| DH-22326 | 3.5x1580 | 40 | 1º 10' | 9 | 3.5 | 1000 | 600 | 14 | 7.5 | 1600 | 232x92x142 |
| DH-22327 | 3.5x2080 | 40 | 1º 10' | 11 | 4.2 | 1000 | 600 | 16 | 10 | 2000 | 280x92x142 |
| DH-22328 | 3.5x2540 | 30 | 1º 10' | 13 | 6.7 | 1000 | 600 | 20 | 10 | 2600 | 330x95x145 |
| DH-22329 | 3.5x3100 | 30 | 1º 10' | 16 | 8.2 | 1000 | 600 | 24 | 15 | 3000 | 395x95x145 |
| DH-22330 | 4.5x1320 | 30 | 1º 10' | 8 | 3.2 | 1000 | 600 | 12 | 10 | 1600 | 205x95x142 |
| DH-22331 | 4.5x1580 | 30 | 1º 10' | 9 | 4.5 | 1000 | 600 | 14 | 10 | 1800 | 232x92x142 |
| DH-22332 | 4.5x2080 | 30 | 1º 10' | 11 | 5.6 | 1000 | 600 | 16 | 15 | 2100 | 280x92x145 |
| DH-22333 | 4.5x2540 | 30 | Hy. adj. rake angle | 13 | 7.8 | 1000 | 600 | 20 | 15 | 3500 | 330x95x148 |
| 1º -2º | |||||||||||
| DH-22334 | 4.5x3100 | 30 | Hy. adj. rake angle | 16 | 9.6 | 1000 | 600 | 24 | 20 | 4000 | 395x95x148 |
| 1º -2º | |||||||||||
| STANDARD ACCESSORIES: | OPTIONAL ACCESSORIES: |
| * Back gauge with dual scale. | * Power back gauge. |
| * Front support arm with front setter. | * NC Back gauge. |
| * Side gauge with dual scale.(H-0808&H-1060 only) | * Pneumatic-type thin sheet supporter. |
| * Power back guage. | * Power back gauge with lifting function. |
| * Finger guard. | * Angle gauge. |
| * 2-Edge top blade, 4-edge bottom blade. | * Front support arm lengthened 1.5/2/3M. |
| * Full electrics & cabinet,foot switch with safety | * Side gauge lengthened 1.5/2/3M. |
| protection. | * Power lubrication system. |
| Address : | No.5, Tai Yuan 2nd street, Taichung, Taiwan, R.O.C. |
| Telephone : | 886-4-2292 9815 ( 6 Lines) |
| Fax : | 886-4-2292 4043 |
| Email : | dhic@ms7.hinet.net |
